EDVAC

 

EDVAC (Electronic Discrete Variable Automatic Computer) was made by J.W Mauchy and J.P. Eckert in 1952AD.

Physically, the computer comprised the following components:

• He was the first to introduce the stored program concept in a computer.

• It used a binary number system rather than decimal numbers for its operation.

• It had almost 6,000 vacuum tubes and 12, 000 diodes and consumed 56 KW of power.

• It covered 490 square foot of floor space and weighed nearly 7 tons.

• The machine requires 30 personnel to operate.

• This machine ran till 1961 at a research laboratory.

• A magnetic tape reader-recorder (describes this as a wire recorder.)

• A control unit with an oscilloscope.

• A dispatcher unit to receive instructions from the control and memory and direct them to other units.

• A computational unit to perform arithmetic operations on a pair of numbers at a time and send the result to memory after checking on a duplicate unit.

• A timer.

  
  photo credit:edn.com

• A dual memory unit consisting of two sets of 64 mercury acoustic delay lines of eight words capacity on each line.

• Three temporary tanks each holding a single word.

• The EDVAC was a binary serial computer with automatic addition, subtraction, multiplication, programmed division and automatic checking with an ultrasonic serial memory.

Additionally it was the computer with

1. EDVAC was a binary serial computer.

2. It had an ultrasonic serial memory capacity of 1,000 44-bit words.

3. It consumed 56 kW of power.

ENIAC

 

• ENIAC(electronic numerical integrator and calculator) was made during in 1946 for the U.S.Army. it was made by John William Mauchly & J.Presper Eckert.

• ENIAC contained 17,468 vacuum tubes, 7,200 crystal diodes, 1,500 relays, 70,000 resistors, 10,000 capacitors and around 5 million hand-soldered joints.

• ENIAC was designed to calculate artillery firing tables for the United States Army's Ballistic Research Laboratory.

• Its main features are as follows:

1. It is the first electronic general-purpose computer.

2. consumed 150 kW of power.

   
   photo credit: edn.com

3. It had no moving parts except the input and output.

4. ENIAC was developed for military needs and was used for many years to solve ballistics (fire weapons) achieved problems.

5. The addition of two numbers was achieved in 200 microseconds and multiplication in 2000 microseconds.

6. It weighed more than 30 short tons (27 t), was roughly 8 by 3 by 100 feet (2.4 m × 0.9 m × 30 m), took up 1800 square feet. 

ABC computer

 

• ABC, the first electronic digital computer, was invented by John v. Atanasoff and his assistant Clifford Berry during 1937-1942.

• It consisted of 18000 valves and other45 valves with wires.

• It was build for calculation of difficult equations and other mathematical equations.

• Its main features are as follows:

1. it uses binary digits to represent all numbers and data.

2. Organizing a system in which computation and memory are separated.

3. Performing all calculations using electronics rather than wheels, ratchets, or mechanical switches.

   
   
   
   picture credit:slideplayer.com
   
   

4. This machine was the first to store a change on a capacitor, which is how today computers store information in their main memory (RAM).

5. It used 45 vacuum tubes for internal logic and capacitors for storage.

Mark I

 

• It was built in Harvard University by Howard H. Aiken during 1937 AD.

• This device contained 50000 parts and was strung with about 500miles of wires.

• Its primary function is to carry out addition, subtraction, multiplication, division and reference to previous results.

• Its features are as follows:

1. It was 51 feet long, 8 feet tall and 2 feet wide which weighed 4500 Kg. 

2. It could do three additions or subtractions in a second.

3.  A multiplication took six seconds, a division took 15.3 seconds, and a logarithm or a trigonometric function took over one minute.

4. It consumed a lot of electricity and emitted a lot of heat.

5. It was also called IBMASCC (International Business Machine Automatic Sequence Control Calculator).

   
   

   
   
   
   
   
   photo credit:history-computer.com

6. This project was a joint partnership between IBM and Harvard University.

7. It can automatically perform a sequence of arithmetic operations: addition, subtraction, multiplications, division and table reference.

8. It could add or subtract two of numbers in three – tenth of a second, multiply them in four seconds.

Tabulating machine:

 Tabulating machine:

• During 1886 AD Dr. Herman Hollerith made this device.

• This it the first device which was used for calculating census and it consists of keyboard paper puncher and card reader.

• This machine is designed to assist in summarizing information.

• Its features are as follows:

1. a tabulating machine would read one card at a time.

2. in early models, the accumulator register dials would be read manually after a card run to get totals.

3. A human operator had to retrieve, load, and store the  various card decks at each stage.

4. By using the similar ideas of Jacquard’s Loom he made a Tabulating Machine in 1886.

5. It could process on the Punch Cards and perform the census calculation faster and accurately.

6. Hollerith’s technique was successful and the 1890 census was completed in only 3 years at a savings of 5 million dollars.

   
   
   
   
   
   photo credit:- http://c250.columbia.edu/
   
   

7. He established his own company called Tabulating Machine Company (TMC).

8. Later, TMC joined with another company and established IBM in 1923 AD.

9. IBM is the largest computer manufacturing company in the world even today.

Lady Augusta Ada Lovelace

 

• Lady Augusta Ada(10 December 1815 – 27 November 1852) was the only legitimate child of the poet Lord Byron.

• She was considered as the first computer programmer.

• She was fascinated by the idea of Babbage.

• Babbage was suggested by her to use binary number system for program and data for the first time.

• Though Babbage's engine has never been built, Lovelace's notes are important in the early history of computers.

• She suggested Babbage use a binary number system for the computer program and data to be fed into the Analytical Engine on Punch Card.

• She gave the concept of computer programming for the first time, so she is considered as “First Computer Programmer”.

• 
  
  picture credit:biography.com

• She invented subroutine and the importance of looping.

• She found that the same set of Punch Cards could be reused to repeat certain instructions.

• One programming language “ADA” was named to honor her for her great contribution in computer programming.

Difference & Analytical Engine

 

• This device was made by an English mathematician of Cambridge University. His name was Charles Babbage.

• The components of this device are a complex system of cogs and lever's which is powered by steam.

• its primary purpose is to produce stereotype plates for use in printing presses.

• Difference Engine & Analytical Engine

Difference engine:- As the name says it was a device with infinite differences. It was simoly a method to perform arithmetical calculations.

• The Difference Engine was developed by Charles Babbage in 1822 AD, which was equal to the size of a room.

• The Difference Engine was his first invention and it was powered by a stem.

• The Difference Engine was fully automatic for mathematical calculation

• it was more than a calculator to perform addition.

• it was decimal based machine. i.e. it uses 10 digits 0,1,2,.... 9. in this numbers are representated by wheels. in this each digit has its own wheel. if a wheel comes to rest there would be the jamming of unit means, tehre would be an error. it stops the machine from calculation.

• He obtained government funding for the development of Difference Engine due to the importance of numeric tables in ocean navigation.

• By promoting their commercial and military navies, the British Government had managed to become the earth’s greatest empire.

Analytical Engine

• Charles Babbage also designed another engine in 1833 AD, but unfortunately he was unable to complete it.

• The analytical Engine contained all components as follows.

• The store equivalent to memory.

• The mill equivalent to CPU.

• The input section using punched cards.

• The output section using punched cards.

• And modern computers are based on it. That’s why, for all his contribution, he is known as “father of Computer”.